Конвертор уровня HELIX AAC
код:00000052542

Цена: 3 000 руб.
под заказ
Как оплатить?
Наличными: курьеру или на пункте выдачи. Безналичная оплата.
При заказе доставки в регионы - 100% предоплата. Подробнее
Как получить?
Вы можете заказать доставку, а также сами забрать заказанный товар в пункте выдачи. Подробнее
в корзину
При покупке данной позиции Вы получаете скидку на ее установку в нашей Студии.
заказать по телефону
Оставьте Ваш телефон:
И мы сами Вам перезвоним
Также Вы можете самостоятельно связаться
с нами и сделать заказ: (812) 645-1718


AAC.2

Original factory sound systems typically have a significant disadvantage – they don’t offer any preamplifier output for driving additional amplifiers.
Here’s where the new HELIX AAC comes into play as it generates a perfectly conditioned preamplifier signal from a speaker output signal of an arbitrary car radio or amplifier.

The new AAC is more intelligent than any other signal converter on the market today.

Its “Double Activation Circuit“ creates a remote signal for controlling external amplifiers in two different manners.
Either it detects the DC offset on the speaker output of typical factory radios or uses an integrated signal detection circuit with variable input sensitivity that can be activated additionally.

The unique „Power Save Mode“ will automatically turn off the „remote-out“, if no input signal is present for more than 2 minutes.
Keep in mind that many cars equipped with “CAN” or similar bus systems leave the car radio “invisibly” turned on for up to 45 min. even if you already have left and locked the vehicle meanwhile. Without the “Power Save Mode“ the amplifiers connected to the AAC would discharge the battery needlessly.

Another exclusive HELIX feature is the new “Diagnostics Error Protection“ circuit which avoids undesired error messages in CPU of your car after the connection between car radio and OE speakers has been separated. This circuit is well designed to even circumvent the "tweeter detection" of today’s factory radios.

Features
Suitable for all car radios - a perfect match for upgrading factory sound systems (even those with factory-installed amps)
Generates a stereo preamplifier signal from the speaker output signal of a car radio or amplifier
"Double Activation Circuit" - generates a +12V remote signal in three different ways to turn on connected amplifiers
Excellent sound quality thanks to very wide frequency response (18Hz - 22 kHz)
"Power Save Mode" significantly reduces the power consumption of connected amplifiers when no input signal is present
"Diagnostics Error Protection" circuit avoids undesired messages error messages in the CPU of your car
Low standby current consumption
Extremely compact and therefore easy to install
Maximum reliability thanks to top-notch SMD manufacturing technology

Specification
Maximum speaker input level
16 Vrms
(= 65 Watts / 4 Ohms)

Maximum output level
4,0 Volt
Frequency response
18 Hz - 22,000 Hz
Total harmonic distortion (THD)
0.01%
Input Impedance
30 Ohm (complex load)
Standby current for remote output
2 mA
Maximum current for remote output
200 mA
Dimensions
(H x W x D)
77 x 37 x 20 mm

3.03 x 1.46 x 0.79 "